gear

(redirected from Gear teeth)
Also found in: Dictionary, Thesaurus, Encyclopedia, Wikipedia.
References in periodicals archive ?
4 V as voltage, 65 rpm as rotating speed and 10% as electrolyte concentration are found optimum and at optimum setting of the parameters, the process shows an improvement of 91% in surface quality of gear teeth profile.
This has been achieved by using a special honing process which polishes the gear teeth, together with fitting a synchroniser sleeve which reduces engine-induced gearshift vibration.
2 is a spur gear of diameter 1 mm with 8 gear teeth and shaft structure.
The innovative tooling concept ensures that a close relationship is maintained between the gear teeth and other part features, delivering improved part accuracy versus broaching.
In the case of gears, UIT testing has been performed to treat the teeth and roots of bevel gear teeth.
True involute action occurs when the rolling motion between the mating gears is as complete as possible, thereby reducing noise levels and lengthening reducer life, since less internal gear slippage means fewer broken gear teeth.
The MP-120 magnetic pickup is placed in close proximity to the six pitch gear teeth of the large flywheel shown in the center of Photo 1.
Made of brass, each ring has a different diameter, with gear teeth on its underside and a particular number of equally spaced steel studs screwed into its top.
For optimum gearing where the going gets tough, the smallest chainwhell should have no more than 28 gear teeth, while the largest coz in the rear should have at least 32.
Its 72 gear teeth require minimal movement to engage the next tooth in those hard to reach places.