6 shows the variation of axial pressure gradient dp/dx with

inclination angle [alpha] for [phi] = 0.

b] is determined based on pullout tests for fibres width

inclination angle [theta] = 0[degrees] according to expression:

which implies that the

inclination angle v is [approximately equal to] 90[degrees].

As the

inclination angle decrease the oil recovery rate increase.

Effect of

inclination angle on heat transfer enhancement under natural convection in square cavities has been studied by Oztop et al.

Experimental Scheme Variable Fixed parameters Selected Parameter parameter value Nozzle ND (mm) NA: NL: AP: OC: CFRPN: Say A posi- 45 Rake 5 5% 100 tion [degrees] bar ml/hr NA ND: NL: AP: OC: CFRPN: Say B (degree) A Rake 5 5% 100 bar ml/hr NL ND: NA: AP: OC: CFRPN: Say C A B 5 5% 100 bar ml/hr Aero- AP (bar) ND: NA: NL: OC: CFRPN: Say D sol A B C 5% 100 rela- ml/hr ted OC (%) ND: NA: NL: AP: CFRPN: Say E A B C D 100 ml/hr CFRPN ND: NA: NL: AP: OC: Say F (ml/hr) A B C D E ND: Nozzle tip distance NA: Nozzle

inclination angle in horizontal plane NL: Nozzle location AP: Compressed air pressure OC: Oil concentration CFRPN: Coolant flow rate per nozzle Tab.

The effect of the corrugation

inclination angle on the thermohydraulic performance of plate heat exchangers, International Journal Heat and Mass Transfer, 28(8): 1469-1479.

where b is the stretching rate which is a constant u and v are the velocity components in x and y directions respectively, [sigma] is the electric conductivity, [gamma] is the plate

inclination angle, [mu], [rho] and [beta] are the effective dynamic viscosity, effective density and effective thermal expansion coefficient of fluid respectively.

The relationships between the shuttle run cutting time, ground contact time, trunk

inclination angle, and trunk angular displacement were determined by Pearson's product-moment correlation coefficient.

Cup

inclination angle of greater than 50 degrees increases whole blood concentrations of cobalt and chromium ions after metal-on-metal hip resurfacing.

Column 9 gives tangent of the

inclination angle of the straights determined by the equations, constructed for two coordinate points of each element: Y = -KX + 1, where K is the tangent of the

inclination angle.

The impact force of water jets will be calculated with aid of the model and verified with the experimental data under different processing parameters such as the water jet pressure, water jet

inclination angle, and standoff distance.