(redirected from Inrush current)
Also found in: Dictionary, Thesaurus, Encyclopedia, Wikipedia.
See: inflow
References in periodicals archive ?
Because, the size of the resistor which is connected to the neutral point of the transformer, has an important role, analytical formulas have been derived to calculate inrush current amplitude with a neutral resistor.
4) for switching unloaded transformer on gird (where inrush current is been recorded) and breaking of loaded transformer (where switch voltage is been recorded) consists of generator (60 MVA), generator transformer (Tr 1, 50 MVA), bus (110 kV) and tested transformer (Tr 2, 50 MVA) with consumers on LV 10,5 kV side.
EPCOS PTC ICLs (Inrush Current Limiters) offer key benefits when used as ICL components for active inrush current limitation in certain applications.
5X thinner than traditional 1U power supplies, Vicor's PFM AC-DC converters integrate system functions including EMI filtering, transient protection and inrush current limiting to reduce design time and design risk.
The 'hot swap' features include functions such as inrush current limiting, undervoltage lockout (UVLO), and thermal overload protection.
Soft starting reduces inrush current and locked rotor heating, Black said.
91-in, units, which are just 1-inch thick, sport a built-in microchip that can be programmed to control speed, trigger an alarm for low-speed or locked-rotor events, and provide monitoring of inrush current limit and tachometer output.
In addition to basic functions, that include over-current protection, over-temperature protection and output auto-discharge, these 300mA output LDO regulators limit inrush current and are recommended for a wide range of applications, particularly mobile devices.
Tenders are invited for controller, ejector, pneumatic, solid state, adjustable time delayed program, 115 volts ac, 60hz, isolated solid state contact ouput (triac), four amperes maximum continous at 140 degrees farenheit, eight amperes maximum continous at 72 degrees farenheit, 25 amperes maximum inrush current.
It also includes under-voltage lockout to ensure proper operation under power-sag conditions, internal softstart to reduce inrush current, fold-back current limit, power good indicator and thermal shutdown.
For some applications, inrush current is a major consideration.