(redirected from filling pressure)
Also found in: Dictionary, Thesaurus, Medical, Encyclopedia, Wikipedia.
Related to filling pressure: mean circulatory filling pressure
References in periodicals archive ?
As the data show, there is a significant difference in paste filling pressure when solder volume on the stencil is varied.
Hypothyroidism caused her lack of responsiveness to pressors and perpetuated her hypotension and increased filling pressures long after she reverted to a sinus rhythm.
In addition, all of the ICUs involved in the study had access to echocardiography, with most patients receiving an echocardiogram to assess left ventricular function, volume status and filling pressure.
Sensor A is located near the gate, where the filling pressure for molding this flat part is about 37.
In comparison with other rubber compounds, the filling pressure P1 required to fill the gear pump is very low when processing silicone due to its low viscosity.
The latest guidelines of the American College of Cardiology/American Heart Association for the diagnosis and management of chronic heart failure stated that definite diagnosis of heart failure with preserved ejection fraction (EF) can be made when the rate of ventricular relaxation is slowed and is associated with the finding of an elevated LV filling pressure in a patient with normal LV volumes and contractility (3).
And they reduce peak filling pressure by more than 250/0-30% versus similar conventional grades.
However, differences in response to filling pressure were noted, and less pressure was required for magnesium alloys than would typically be used for aluminum alloys (Fig.
LAP is the "gold standard" in hemodynamic monitoring for HF, providing the most objective, direct measure of left-sided cardiac filling pressure, increases in which precede development of pulmonary congestion (fluid in the lungs) and other HF symptoms.
Based on these details, the injection process takes place with the smallest pressure losses for highest cavity filling pressure available.
improved and more consistent casting quality due to precise control of filling pressure and precise directional solidification of the castings using the water and/or air channels for cooling;