forged


Also found in: Dictionary, Thesaurus, Medical, Acronyms, Idioms, Encyclopedia, Wikipedia.
References in periodicals archive ?
The aviation officer contacted the Schengen visa counsellor at the airport, who told him that the visas on the two passports were forged.
Forged aluminum wheels, according to Shih, save at least 5% in fuel compared to traditional aluminum counterparts, with the forged-wheel characteristics enabling better cooling and longer tire life by at least 20%.
The BD20 note was forged with the use of coloured printing machine.
From experiments, they found that bevel gear with complete formation of the teeth was obtained without making any forming defects although flash in a forged product and punch fracture was occurred due to a slight difference in the punch stroke during formation.
In Japan, Sumitomo Metals produces forged crankshafts for passenger cars, trucks, construction machines and other machinery at the Osaka Steel Works in Osaka City, which belongs to the Railway, Automotive & Machinery Parts Company, with an annual capacity of approx.
Cast steel was found to be equivalent to double-refined forged steel of the same composition and hardness with only a slight perception of difference across the test cycle range.
CTI chose Scot Forge to supply the forged parts after Williamson and Purchasing Manger Juel Hensley visited Scot Forge's plant.
This escalating interest in the category has translated into greater popularity of oversized pieces, pieces with extra weight and finishes, as well as forged flatware, she said.
If the barrel has this lug forged in place, the steel weight requirement drops over half, and the machining requirement more than doubles.
Hardness of P/M forged steel is about 45 Rockwell C, though heat treating can raise it to about 68 RC.
In some cases, the immature cells had actually forged a tie with the nerve, a required step if hair cells are to begin functioning, the researchers say.
In the second case, a hot-forged preform is cold forged (combinations of reducing, coining, or ironing) that can affect the entire part.