strength

(redirected from impact strength)
Also found in: Dictionary, Thesaurus, Medical, Financial, Encyclopedia, Wikipedia.
Related to impact strength: hardness
References in periodicals archive ?
Table 1 shows the effect of fiber size on the impact strength of Polyester/Bertam composite and comparison with other fibers reinforced thermoset.
It is worthy of noting that for the 80/20 PP/POE blend prepared with chaotic mixing, the highest impact strength can be achieved at position no.
The XANTAR LDS 3723 (PC/ABS) is specifically tailored to provide excellent practical impact strength, enabling non-black coloured mobile phone housings or other hand-held telecom devices to pass the stringent industry drop or tumble tests.
51% aluminum alloy) failed to improve the impact strength of the alloy significantly, plausibly because a small percentage of dendrites was unable to form a continuous dendritic framework so a fracture could always proceed through the weak zinc-aluminum eutectic.
In other words, as the impact strength in general increases, the stiffness or modulus of the resulting blend decreases.
It could be seen that the tensile strength decreased persistently, while the breaking elongation Increased and the impact strength various in "S" type curve when the amount of CPE is increased.
Despite the PBT/ABS/MGE blends studied so far presented very attractive values of impact strength properties, there is still a lack of studies concerning how these properties are affected by the extrusion parameters, like extrusion feed rate, screw rotation speed and geometry of the kneading blocks of the screw.
The tests also showed that, for impact-modified products, the time needed for Charpy impact strength to fall to half of its original value was more than doubled for the new hydrolysis-resistant PBT compared to the corresponding non-stabilised PBT.
Technical data addressed in the brochure include barrier properties, compatibility, dielectric properties, compression set, impact strength, heat resistance, flexibility and adhesion for the company's complete line of resins.
Chemline says high- impact strength is required when pipe is being laid.
impact strength at -4F (-20C) using an impact specimen per DIN 50115, U-notch, 10 ft-lb average with a minimum individual value of 8 ft-lb;
These RTP 2200 Series PEEK Long Fiber Compounds significantly improve impact strength when compared to conventional short fiber PEEK materials, making them ideal for metal replacement applications.