unbalance


Also found in: Dictionary, Thesaurus, Encyclopedia.
References in periodicals archive ?
It can therefore be concluded that the confluence lambda signal amplitude provides a measure of the unbalance magnitude, while the time, or better angular, interval between points with null derivative (maxima or minima) represents the key to identify relative cylinder AFR deviations, and to define how to correct the existing non-uniformity.
This should be useful for cooperative design and control of different types of harmonic, unbalance and reactive power compensators.
This means that one of the reasons of the specifically considered unbalance is different nature and value of the phase resistances of the three-phase loading.
As it isn't convenient to in on-site measurement and calculation, this paper adopts the simplified scalar Unbalance definition as follows
A generalized computer program would be in order for determining an optimal design by degree of unbalance and further for dealing with user-created designs.
The right-hand side (RHS) terms of Equation (2) represent the generalized forces and momentum acting on the rotor, which are due to the bearing reaction forces and to the centrifugal forces associated with the mass unbalance.
Forces that show up at the spindle frequency include unbalance forces and the force of each tooth slicing away a "chip" of material.
Additional heating that varies as cube of unbalance.
By considering the above guidelines, investing a certain amount of time understanding the standards applied to balancing, and recognizing the actual forces that result during the cutting process and the amount of unbalance, most shops can more easily determine the right economics to apply for rotating tool balance situations.
Frequency (or spectral) analysis is the most common method used for detecting machine faults such as rotor unbalance, shaft misalignment, mechanical looseness, and bearing damage.
degree of magnetron unbalance, but also on whether the magnets at the cathodes face like or opposite poles.
The asymmetry of the active-reactive load elements, both in symmetric and asymmetric under voltage leads to unbalance current.