hinge

(redirected from Hinge pin)
Also found in: Dictionary, Thesaurus, Encyclopedia.

hinge

verb arise from, around, center, center on, critical moment, critical period, critical point, crossways, crowning point, crucial moment, culmination, decisive moment, depend on, derive from, emanate from, ensue from, evolve from, gennrate from, hang, issue from, juncture, pivot, turn out
Associated concepts: case hinging on circumstances, outtome hinges on the evidence
See also: crossroad
References in periodicals archive ?
Set up your mount with the hinge pin on your left when you're facing north and use the tripod's pan/tilt adjustments to aim the hinge pin at Polaris.
When you flip the middle hinge to the opposite side of the fridge, the upper and lower hinge pins will be facing the wrong direction.
These fasteners are then meshed together and connected with a hinge pin.
Installers fasten parallel plate segments across both belt ends, mesh the loops from the ends, and then insert a hinge pin to lock them together.
The barrel is held to the receiver by the hinge pin, which passes through mating holes in both the receiver and the barrel lug.
These hinges are suitable for light panels where they enable quick assembly as they are only fixed with one half on the panel itself and the hinge pin then located in a hole in the frame.
The new 725 receiver is significantly lower than other Citori 12-gauge receivers, yet the 725 shares the renowned durability of generations of Citori O/Us with the same rugged full-width hinge pin and tapered locking bolt design.
This leaves the trigger free to move on the hinge pin. At this time the trigger can be removed by releasing the retaining washer from the trigger hinge pin and removing the pin.
For strength and even load distribution, a single lip hinge pin is included and the deck's front structure incorporates a continuous one-piece headboard.
But if you see an oblong hole where the tubular hinge pin mates with the hinge bracket, replace the hinge.
Your flight could come to an abrupt end if the tail rotor is damaged by chewed pieces of the hinge pin rod.
CFA hinges utilise an AISI 303 stainless steel hinge pin for maximum strength, while the CFAX with plastic pin is aimed at less demanding applications with a corresponding cost benefit.