References in periodicals archive ?
Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression.
However, with regard to a slag ratio higher than 40%, due to the lower reaction degree of slag, the ultimate strength ratio is less.
Generally, the analysis for the ultimate strength of the footing is based on the principle of virtual work.
Comparison between ultimate strength and performance based design for RCC buildings.
Ahmadi Fard, [1] have performed laboratory studies which deals with how doubling up the side studs can affect on behavior coefficient and ultimate strength of cold formed thin steel walls.
The results show that the diagnostic systems comprised of miniature piezoelectric sensors decrease the ultimate strength of the composite material by 27%.
A positive effect had been observed in the ultimate strength while negative effect was noted for the tensile modulus.
1978) to calculate the ultimate strength of straight steel plate girders in which it was assumed that shear in a plate girder is resisted by the web plate up to the elastic load (Fig.
For group stud shear connection in cast-in-place concrete slab, test results showed that the current design provisions are applicable for the ultimate strength and fatigue endurance when the minimum spacing was satisfied (Okada et al.
Mechanical Properties of the Gravity-Filled Green Sand at Various Compactability Levels Compactability Ultimate Strength Stiffness Toughness % (# Jolts) (Jolts/in.
The collection consists of a Reinforcing Shampoo, Reinforcing Conditioner, and Ultimate Strength Solution.