Hart

(redirected from WirelessHART)
Also found in: Dictionary, Thesaurus, Medical, Encyclopedia.

HART. A stag or male deer of the forest five years old complete.

References in periodicals archive ?
When and if process conditions change, monitors can be moved as necessary, so long as they are placed within the coverage area of the WirelessHART network.
[8] Han S, Song J, Zhu X, Mok AK, Chen D, Nixon M, Pratt W, Gondhalekar V (2009) Wi-HTest: Compliance test suite for diagnosing devices in real-time WirelessHART network.
Applications IoT Technology Frequency Zigbee 915 MHz, 2.4 GHz General (smart Z-wave 2.4 GHz home, smart Bluetooth 2.4 GHz building, etc) WiFi 2.4 GHz, 3.6 GHz, 4.9 GHz, 5 GHz, and 5.9 GHz GPS 1575.42 MHz, 1227.6 MHz, 1176.45 MHz HoT WirelessHART 2.4 GHz ISA 100.11a 2.4 GHz LoRa 915 MHz for the U.S., 868 MHz for Europe, LPWAN (smart city, and 433 MHz for Asia smart farming, etc) Siqfox 868 MHz, 902 MHz MBAN (IEEE 2360 to 2400 MHz Medical 802.15.6) WBAN (IEEE 2.4GHz, 800MHz, 900MHz, 400MHz 802.15.6) Avionics WAIC 4200 MHz to 4400 MHz Table 2: Factors for improving range.
et al., "When HART goes wireless: Understanding and implementing the WirelessHART standard", IEEE InternationalConference on Emerging Technologies and Factory Automation,ETFA 2008.
Other suppliers have no plans for Ethernet-enabled sensors, saying IO-Link, HART or WirelessHART can connect sensors to control systems and, from there, into an Ethernet network.
[4] C., Deji, N., Mark, M., Aloysius, "WirelessHART Real-Time Mesh Network for Industrial Automation," Springer, 2010.
The researchers found that short-range wireless mesh technologies such as WirelessHART and ISA100.11a as well as Wi-Fi, Bluetooth, and proprietary solutions will make up the majority of the market over the next five years, but they add that adoption of low-power wide-area-network (LP-WAN) technologies such as LoRa, Sigfox, LTE-M1, and NB1 will increase even faster.
The self-organizing IEC 62591 (WirelessHART) network covers an area stretching 2 km (1.5 miles) by 650 m (2,100 ft) wide and sends pressure and pH variables to the main control system.
WirelessHART [40], extended from Highway Addressable Remote Transducer Protocol (HART) framework, has a centralized network management architecture, multichannel TDMA transmission, redundant routes, and avoidance of spatial reuse of channels for enhanced reliability and real-time performance.
Some other potential wireless standards using IEEE 802.15.4 [1], such as ZigBee, WirelessHART, and ISA100, which have low data transmission rate, are not taken into consideration for the wireless platform of HTGR.
'Open' or 'closed' signals are received by the wireless transmitter and can be sent to a control room via a WirelessHART gateway.
Xiuming, "WirelessHART and IEEE 802.15.4e," in Industrial Technology (ICIT), 2014 IEEE International Conference on, 2014, pp.