# coordinate

(redirected from coordinate system)
Also found in: Dictionary, Thesaurus, Medical, Acronyms, Encyclopedia, Wikipedia.
References in periodicals archive ?
An important element to consider, is how to find the coordinates of an event point (earth like planet) with respect to the coordinate system (K).
b]) is the angle cosine of the X axis of coordinate system A with the X axis of coordinate system B.
As mentioned above, since the offline programs are created in workpiece coordinate system, the calibration is triggered by a linear transformation of calibration pairs to put the origin of the workpiece coordinate system.
The LKS94 national geodetic coordinate system that is presently used in Lithuania is the realisation of the ETR89 European geodetic coordinate system in Lithuania (Skeivalas 2008; Zakarevicius 1994; Zakarevicius 2003).
If the camera with the known camera calibration parameters is used, the transformation of image to the geodesy coordinate system is calculated according to the equation (Software PhotoMod 4.
In the global coordinate system OXYZ, the aerodynamic force is described by the wind velocity [V.
To finally translate the coordinates in the reference coordinate system into the coordinates in either of the body coordinate systems, Equation (8) is used.
Other Geoarchiving Challenges Other preservation challenges include securing and adequately defining archival and use rights for content; preserving semantic information associated with datasets; providing long-term support of coordinate systems and datums; and maintaining the independence of the preserved content from any particular repository software environment.
The chapter includes a worked example that uses prjFinder to identify an unknown coordinate system.
Why was the carbon coordinate system not adopted by everybody as the fundamental coordinate system, with C-H or C-C single bond as the length unit and the angle of the tetrahedron as the angle unit?
In summary, a rectangular coordinate system and the following velocity profile can be used for analysis of single-screw extrusion.
The profiles are transformed into a common coordinate system and sent to a measurement server software component that per forms a best-fit match to a reference measurement or CAD template and calculates values for virtual calipers which have been defined.

Site: Follow: Share:
Open / Close