References in periodicals archive ?
Crosscutting first means the cutting envelope will by necessity be larger on the crosscut saw.
Overall proportion Operation of responses Main machines Sawing 36 Bandsaw, table saw, radial arm saw, crosscut saw Profiling 16 Router, shaper, moulder Sanding 15 Belt sander, bench sander Drilling and jointing 13 Drill press Surfacing 10 Planer, jointer Edgebanding 5 Edgebander, trimmer Turning 3 Lathe Drying 2 Kiln Sorting 1 Pallet machine Table 2.
These short, crosscut saws feature a curved cutting edge on the bottom.
Sure, we'd still maintain the trails, but we'd do it--get this--with crosscut saws.
Tool for setting and swaging crosscut saws, as identified by Donald W.
After I decided where to put the chalk tray, I cut the profile with a crosscut saw to fit and placed the tray.
In the past, if a caber could not be thrown, contestants would use a two-handed crosscut saw and trim an inch at a time until one could finally lift it.
Portable circular bucksaws eventually overtook the powered crosscut saw in popularity, but only for a while.
William Sullivan reads from his book, "Cabin Fever: Notes From a Part-Time Pioneer," a chronicle of his 25 summers spent building a log cabin with his wife using not much more than an ax and a crosscut saw.
Before electric and gas powered engines, no homestead could have existed without a good crosscut saw.
Then, teetering on the springboards, they whipped a crosscut saw back and forth as another crewman drove wedges into the cut to guide the tree's fall.
To a homesteader "bleed off" is a much more sinister term, used if your thumb gets too close to your crosscut saw.