(redirected from evaporating)
Also found in: Dictionary, Thesaurus, Medical, Encyclopedia.
Related to evaporating: condensing
References in periodicals archive ?
"Because the light shining on this disc is so much weaker than that shining on known evaporating discs, it was expected that there would be no evaporation.
The interface between an evaporating wetting liquid and a solid includes a thin-film region where a large heat flux may occur.
Evaporated cane juice still contains some molasses from the evaporating process, which gives it its light brown color.
Cycle The combination of the four processes of condensing, expanding, evaporating and compressing which creates a closed loop in order to keep the cold stuff cold.
With less-than-normal rainfall, there is not enough precipitation to replace the evaporating water.
This implies that Upsilon Andromedae b moved to its present position after it had formed and that it is now evaporating rapidly.
For parts that are painted, plated, printed, or stamped, Speed Mist Paintable is fast evaporating with low residue.
The environmentally friendly enclosed system contains all of the evaporating solvent, allowing subsequent trapping and collection via a high performance glass condenser.
"If the conditions are wet, then more heat goes into evaporating moisture, so things don't warm up," says Trenberth.
Condensate is collected until a limit, where a heating element is triggered making the water evaporating into the air.
"The evaporation increases the capillary pressure and constantly replenishes the cooling fluid evaporating at the cooler surface" says Hartick.
The method entails spraying a coarsely crystalline crude pigment and/or a poorly dispersible prepigment in suspension form through nozzles to a point of conjoint collision in a reactor chamber enclosed by a housing in a microjet reactor to form a pigment suspension, wherein the microjet reactor has a gas entry side and a product and gas exit side, passing a gas or an evaporating liquid into the reactor chamber through an opening in the housing for the purpose of maintaining a gas atmosphere in the reactor chamber, and removing the pigment suspension and the gas or the evaporating liquid from the microjet reactor through a further opening in the housing by means of overpressure on the gas entry side or underpressure on the product and gas exit side.