References in periodicals archive ?
Particularly when cleaning tube bundle heat exchangers with tube diameter over 40 mm, considerable force is required for cleaning.
Another EMC collector and heat exchanger were purchased for the main baghouse at the same facility a few years later.
Impact of heat exchanger's depth on thermal-hydrualic performance: Heat exchanger's depth is another important factor which directly impacts the performance.
An air collector installed directly after the heat exchanger helps distribute the heated medium evenly across the piping to the entire burner system.
Alfa Laval, Doosan Heavy Industries & Construction, Kelvion, SPX Flow, and Xylem are the leading players in the global heat exchanger market.
For example, the visual method does not indicate how much frost is formed inside the exchanger. In addition to visual inspection of the exchangers, the pressure drop across the exchangers, air temperature change, and effectiveness of the exchangers were monitored.
Heat exchanger cracks can range in size from small, almost imperceptible fissures, to gaps wider than a half inch or more.
The pressure drop is increased by 10% for heat exchanger with 10[degrees] baffle cut angle and pressure drop is decreased by 11% for heat exchanger with 15[degrees] baffle cut, 17% for heat exchanger with 20[degrees] baffle cut and by 22% for heat exchanger with 25[degrees] baffle cut compared to segmental baffle heat exchanger as shown in Fig.
Manufacturers have relied on tube-fin heat exchangers for decades.
By using Kenics static mixer elements in each heat exchanger tube, the film build-up commonly associated with empty tubes is significantly reduced.
With regard to spiral freezers and coolers, a typical single-spiral cooler or freezer uses a heat exchanger that has 4,100-71.000 sq.