Pressure in the apparatus is measured at a minimum of two locations using capacitance diaphragm gauges (CDGs): CDG1 upstream of the valve cluster and CDG2 downstream of the
flow cell. To measure the pressure at other locations under selected conditions, an additional CDG was temporarily installed either on the fill port of the ampoule or between the two elbows downstream of the ampoule outlet.
The
flow cell module consists of rubber
flow cell and stainless part.
Johanna Zellmer, Summer Olympics Athens, 2017, San Marino commemorative sterling silver 10 Euro coin: 2004, forged, stamped and punched; various Illumina
flow cells, cut and fused, 180 x 105 x 2mm.
The FUS-100 and FUS-200 urine sediment analyzers are also based on
flow cell imaging technologies.
Under these conditions, the carrier solution displaced the sample zone from the coil through the photometer
flow cell toward the waste outlet (W).
Firstly, the length of flow-line between the injection valve port and
flow cell was built as short as possible in order to reduce dispersion and dilution.
Modeling again was able to quantitate the capacity increase after improvements that used Lean methods, calculating the testing capacity to be 528 samples per day (Figure 4) based on
flow cell processes.
The use of the
flow cell described above made automatically the registration of molecular absorption spectra for the flow electrolyte on three nickel deposits: I--freshly prepared electrolyte, II, III--electrolyte reused, in the sense that it was used in a second, third deposition respectively, the first electrolyte after deposition ceased, Figure 4.
The PharmaSense system combines a USP 4 compatible
flow cell and MRI scanner into one system so that the controlled release tablet can be imaged while it dissolves in the
flow cell and a dissolution profile is collected.
The ports are interconnected by microchannels and a built-in multipurpose
flow cell connects to optical fiber probes for spectral analyses in either absorbance or fluorescence mode.
When a manufacturer of spectrophotometers experienced a fluid transfer problem in the
flow cells of one of its instruments, it went in search of a solution that would fit its specific needs.
The
flow cell for NIR measuring was installed on the side-flow.