References in periodicals archive ?
The percentage of the low angle grain boundaries [THETA] < 8[degrees] decreases when the rolling reduction increases in the steel strips rolled at RT = 790[degrees]C and RT = 830[degrees]C.
Continuous yielding took place in the steels subjected to a rolling reduction of 60%, while the yield point phenomenon (discontinuous yielding) occurred in the rolled steels with a rolling reduction of 30%.
Today's modern bronze, hot rolled, cold rolled and stainless steel fenestration products offer numerous modern features and options.
The most that can be rolled over is the taxable part of any eligible distribution.
401(a)(9), the excess amount is an eligible roll-over distribution and it is therefore subject to the mandatory 20% withholding requirements (unless the amount is rolled over as part of a direct roll-over or is less than $200).
transaction - the IRA receiving the rollover contribution and the IRA that distributed the assets - cannot be distributed and rolled over into yet another IRA within the next year without violating Sec.
The tray is roller bearing mounted to enable it to slide to the operator for collection, or one side of the rolled material is lifted and pushed to the roll face for remilling.
The pigs are usually too large and there have been too many rolled up ahead of the time they are needed, thus the warmed stock is no longer at the elevated temperature that is required to produce the quality of stock desired from a calender.