movement

(redirected from rotational movement)
Also found in: Dictionary, Thesaurus, Medical, Encyclopedia.

movement

(Activity), noun campaign, cause, mass movement, motion, operation, principle, series of actions directed towards a particular end, undertaking

movement

(Progress), noun action, agitation, circulation, course, denomination, effort, great cause, interest, issue, measure, outflow, performance, removal, shift, step, stir, stride, transition, transmittal, traveling

movement

(Shipment), noun cartage, conveyance, transit, transportation
See also: activity, band, campaign, circulation, course, denomination, dispatch, operation, outflow, progress, transition, transmittal
References in periodicals archive ?
Figure 6 Mean and standard deviations of peak and average positive free moments for the left leg during the rotational movement for different footwear conditions.
Axial Movements (rolling over): Series of at least 15[degrees] rotational movement of trunk from one static position to another static position that sustains for at least 5 min in y-axis plane.
The Pico de Navas landslide has all the characteristics to classify it as a large magnitude rotational movement (Varnes, 1978; Corominas, 1989; Cruden and Varnes, 1996), affecting more than 50 x [10.sup.6] [m.sup.3] earth.
The direction of the D, C points' velocity vectors is caused by the rotational movement of links 3, 4 respectively to their axes of rotation.
Each actuator combining linear and rotational movement, acting like a pair of prismatic (P) and revolute (R) joints, can generate independent linear [I.sub.i] and angular [[beta].sub.i] displacements along its main (symmetry) axis.
Both translation and rotational movements of the table is possible to set up.
This implies that muscle contraction is more important for females than males to resist forceful rotational movement of the knee.
All this allowed loading the extremity on the second day after surgery with preservation of joint motions in three planes: flexion-extension, adduction abduction and rotational movement.
Because repetitive loads, shock, and loosening must be decisively handled for implant use, traditional fasteners susceptible to self-loosening rotational movement, stripping, and shearing are not always appropriate.
The two halves of the QHA now have two degrees of freedom, a rotational movement around axial direction and a linear movement along the axial direction.
Technical equipment with rotational movement has different types of bearings, which are known as technical noise generators.
To this gaseous mass, let us restitute now the more or less slow rotational movement it must have acquired, at the same time as its heat, through the gathering of the matter that constitutes it; the ascending and descending currents will incur, because of this rotation, a certain deviation.