SI

(redirected from silicon)
Also found in: Dictionary, Thesaurus, Medical, Financial, Acronyms, Encyclopedia, Wikipedia.

SI

abbreviation for STATUTORY INSTRUMENT.
References in periodicals archive ?
An extensive analysis of the report of the Aluminum Powder market is given, which includes the global presence of crucial driver and constraints that are working in the proliferation of the Silicon Gases market.
The Silicon Gases market report's crucial half additionally includes the regional description that gives an entire analysis of its growth at a worldwide level.
The results show that GEN2 PUREVAP is able to produce commercially viable 99.73% silicon with 0.166% Fe and 0.0424% Al, representing chemical grade metallurgical grade silicon metal.
Being able to use lower cost raw material represents significant potential cost savings, however another significant outcome from this is that, as a result, the PUREVAP process should only require 4.5 MT of raw material (lower purity silicon dioxide and cheaper reductant) to produce 1 MT of metallurgical grade silicon metal.
Currently, most silicon metal produced in China is also consumed by China and its immediate neighbors, with little to no exports to the United States and Europe.
Blocking imports from the largest silicon source in the world was not enough to save the five U.S.
The firm plans to complete a minimum of 13 drill holes at Koot and also conduct a metallurgical program to test for suitability of upgrading mineralised materials to silicon metal and solar grade silicon.
Results: Low silicon level (44.07+-75.86 ug/g) was found in skin tissues of normal individuals as compared to those who developed post-silicone granuloma (1709.21+-1851.72 ug/g).
Conclusion: Silicon may be found in normal skin tissue due to daily use of cosmetic products; however the level is significantly low.
Porous silicon was first discovered by Uhlir in Bell laboratory in 1956 when studying the electro-polishing of silicon in hydrofluoric acid solutions [8].
Anodization of silicon in hydrofluoric acid solution is considered the best technique to form homogeneous porous structures reproducibly, although other methods have also been reported, such as stain etching [15], galvanic etching [16], metal-assisted chemical etching [17,18], and contactless electrochemical etching [19].
Low-dimensional structures of silicon have been introduced and tested for better electrochemical performances [2, 23-26].