When comparing with the tension test
, the rubber membrane having a thickness of 0.3048 mm and diameter of 100 mm and antifriction were used between a specimen and end plate at the triaxial compression test.
The coefficients of variation were lower than for the above-discussed tension test
results because OSB properties tend to be homogeneous at large scale.
The results of compression and tension tests
at ambient temperature are given in Fig.
Test pieces were held to a chuck of a tension test
machine and tensile strength, elongation, and modulus were measured in accordance with ISO 7253 (1984).
Alison: `Suzi scored 75% in her tension test
. To combat her busy day with the kids, she must fit in more "me time" to help her unwind.
Three types of coupon testing were conducted with each adhesive: a single lap shear, a double lap shear and a tension test
. The single lap shear test was conducted per ASTM D1002, which also can be used as an inspection criterion for material acceptance.
Caption: Figure 1: (a) Specimen for the conventional tension test
; (b) MTS 647 hydraulic wedge grip used for the conventional tension test
Then, the optimum asphalt content was used in the preparation of specimens for the indirect tension test
to evaluate the moisture susceptibility of the warm mix asphalt.
The strength estimation of the sheet metal using an analytical method generally adopts simple criteria, such as fracture elongation or maximum tensile strength measured from the uniaxial tension test
. However, since these criteria only reflect partial aspects of the design, they are not suitable for a seat structure to which complex stress is applied [2, 3, 4].
Using the hot uniaxial tension test
to differentiate between the non-aging and aging steels represents an easy method to do that.
Tensile coupons test: a) Tension test
specimen; b) Tension specimen at end of test