Also found in: Dictionary, Thesaurus, Medical, Acronyms, Idioms, Encyclopedia, Wikipedia.
See: blank, need
References in periodicals archive ?
Antonius Nino, representing Becker, described the importance of Vacuum Technology for various manufacturing processes and highlighted modern technological advancement in Vacuum Systems.
Prices range from about $30 for a Bissell handheld that is great on pet hair to over $1000 for a SEBO canister vacuum built in Germany.
The molding process takes place under high mechanical pressure, at temperatures between 175[degrees]C and 180[degrees]C, and in a vacuum of l mbar (equal to atmospheric pressure of 1,000 mbar minus 999 mbar).
In this paper we analyze vacuum gauge unreliable pressure measurements during technological coating process at Sidrabe Inc.
Samsung Electronics OOO maintained its leadership in vacuum cleaners, accounting for a 29% volume share in 2014.
In general, a vacuum bag does not care which glue is used, it will press all glues with 1800 pounds per square foot of pressure.
Air and vacuum work together to make everything happen in a resin conveying system.
Vacuum pumps provide high vacuum levels at moderate volume flow rates--these are used for applications such as drying, degassing, extrusion calibration, and vacuum forming.
However, this kind of conventional combined vacuum gauge has certain problems including, (1) the entire gauge head has to be replaced if one of the gauge heads failed, (2) the gauge heads are more complicated and break easily, (3) the gauge heads are expensive.
Portable vacuum units are suitable for vacuuming cooling/lubricating agents, e.
In the most common vacuum diecasting processes, the connection between the part receiving the vacuum and the mold cavity is primarily produced by means of an integral vent valve in the mold.
Thus, when companies begin researching industrial vacuum systems and compare them against the concept of shop-type vacs, they are often surprised by the power, size and cost of the industrial units.